| Manufacturer |
Model |
Password Procedure |
| Satcruiser |
DSR-101 Ace/Plus |
3472 |
| DSR-101, 201P, 301 |
0000 |
| Channel Master |
|
6442 Hold menu key and then
simultaneously press power key while unit is in standby mode. |
| Chaparral:
Master Clear |
Cheynne |
Press AF94, Sat, then store
on remote |
| Cheyenne IRD |
Press AF94, Sat, then store
on remote |
| Sierra |
Press AF89 Sat, Store on remote |
| Sierra II, Sierra II+, Sierra
III |
Press AF94, Sat then store
on remote |
| Monterey |
|
2345 |
| Monterey-Master
Clear |
Monterey 50,55,70,90,95 |
While in standby mode, press
and hold the volume up and enter the same time. Then press and release
the power key. After 10 seconds release the enter and volume
up keys |
| Monterey 30, 35 |
While in standby mode, press
the master reset button located at the back, then press and release
power key. Wait 10 seconds then release master reset button |
| Command Performance
Avanti |
|
3900 |
| Drake |
ESR 1024,1124 |
Press 1024 for complete memory
clear. |
| ESR 1024,1124,1324,1424,1624,1724,1824 |
Press HELP and enter 0000 (Parental
delete) |
| General
Instrument |
GI 2400, 2410,2500,2600 |
With the memory lock light
off, simultaneously press the alpha num. and store keys for 5 seconds.
The front panel satellite display will show a "STAR" and
a "DASH" after the sequence is complete |
| GI 2650, all 2700 serious and
Innovation receivers |
When prompted for a password
enter 92121 The on screen display will prompt you for more than five
digits, all you must enter is these 5 digits |
| 4DTV |
92121 |
| Houston
Tracker |
Tracker 4 &
5 |
Installation # = 7907878 |
| Parental Lock# = 908112 |
| Tracker 6,7,8 |
Installation# = 2226903 |
| Parental Lock# = 9429 |
| Echostar 3000,4000(new), 2406,
Echostar 310, 410 |
MAST (8472) |
| Tracker 8+,9,10,10+,Echostar
6000,510,710 |
Press XF (63), press 8472 select
installation and press ENTER twice |
| Echostar 4000 (old two piece) |
Press memory lock then enter
437 |
| Kenwood |
KSR1000 |
9999 |
| NextLevel |
4DTV |
92121 |
| Hidden Menu Screen |
Unit Status Menu: Press options,
press 6 (system setting), press 0
Diagnostics Menu: Press 6 (system setting), press 778
|
| Nextwave |
NCC-600 |
Turn off power, turn on while
holding PRG button on remote. Go to clear memory and enter 0500 |
| Panasonic |
GRD 4500 or 700 |
Parental Lock=3872
Setup=5172 |
| PS-700EX |
Setup=5172
Installation=3872 |
| Toshiba |
All Models |
1048 |
| Uniden |
President (all models) |
8570 |
| SQ530,SQ560,SQ590 |
3573 |
| Super 4400 |
3315 |
| Supra |
3573 |
| Ultra |
3573 |
| UST 2020, 4500, 4600, 4700,
4800, 4900 |
3573 |
|